Subcritical and cold as can be. Run it low and slow, keep the extractor cold and the separators just under the liquid/gas line. If you overflow just wait and vent out the bottom of the accumulator for the lighter terpenes.
Look into carbon scrubbers that most grows use. I have heard great things of the Dry-Eaz Defend Air though they are pricey. Another route would be using smaller carbon scrubbers wherever your heavy smells are generated. i.e. vacuum vents, solvent ve…
Thats a ton of residual ethanol in your oil. Plate the oil thinner and pull full vacuum in an oven at 70C for 30-60 minutes. There should be way <300 ppm after that, if you don't pre-decarb the plant material this is an ideal time to decarb the o…
An additional means of getting the water out of the air line is to hook up a chiller of sorts before your inline filter. This should condense all the water out of the air before it passes through the filter thus allowing the filter to work more effe…
Are you only looking at terpene content? THC potency should be observed as well. What conditions are you crashing out your components at? I have seen more volatile terpenes lingering in our CO2 after extraction and not crashing out with our concentr…